Sump Pump Repair and Replacement

Sump pumps help protect homes from flooding caused by storms. However, they can become damaged from heavy rains and require repair or replacement.

Sump Pump

A sump pump that fails to start could be a sign of a malfunctioning float switch. It may also indicate a problem with the motor or impeller. Contact Plumbers in Spring TX for professional assistance.

A check valve is a device that shuts off flow in the opposite direction that it is allowed to go when upstream pressure exceeds downstream pressure. They are commonly found in the pump discharge line. They are available in a wide range of sizes, materials and end connections including threaded, socket weld, butt weld, flanged, grooved and wafer types. They are often characterized by an arrow stamped on the body of the valve which marks the normal direction of flow.

If your sump pump is constantly running, it may be a sign that it is too small for its pit or that it has a clogged impeller. This problem will overwork the motor and shorten its lifecycle. It’s best to schedule an appointment with a professional right away.

Debris in the pit is another common cause of sump pump problems. It’s important to clean out the pit regularly to keep debris from working its way past the float switch and into the pumping mechanism.

Clanging sounds coming from the sump pump can be a sign that the discharge pipe is rattling against other plumbing in your house. It’s a good idea to insulate the pipe and/or add more hangers to keep it in place.

A well-maintained sump pump can prevent costly water damage to your home and ensure that your basement stays dry. Our experienced technicians can diagnose any problems and make the necessary repairs to ensure your sump pump system is working properly to protect your home from flooding and water damage. Our service technicians will also replace the battery in your sump pump alarm and test the backup battery to ensure it has a good charge. In addition, they will clean the basin lid and clean out any sediment or silt in the pit to keep it from building up and potentially causing float switch or pumping problems. They will also make sure the pit has enough space for the sump pump and the drain line. This is very important, especially if you have a basement that could flood from storms and other events.


The motor of a sump pump drives the impeller that pushes water up and out of the pit. When this part burns out or stops working, the pump will no longer function properly, and you’ll need to call in a professional to repair it.

If you notice that the pump is cycling in sporadic bursts and taking longer than usual to empty out the basin, it may have a malfunctioning check valve. This means that the water it pumps isn’t making it through the discharge pipe, so the pump has to keep trying to displace that same water over and over again.

A faulty float switch can also cause the pump to shut off prematurely, so it’s important to inspect this component regularly. The best way to do so is by unplugging the pump, disconnecting it from the piping, and then removing it from the pit so you can remove any debris that has gotten into the screen or impeller.

Other problems that can cause a sump pump to produce loud or strange noises include an overload of sediment and a jammed impeller. These can be caused by debris that has worked its way past the float switch. You can prevent this by regularly cleaning the pit and removing any extraneous items, such as dehumidifier hoses. You can also add a lid or grate to your sump pit to prevent debris from getting into the float switch area in the first place.

Finally, sump pumps can stop functioning due to old age, so be sure to replace the unit after a set period of time. Consistent maintenance and a few preventative measures can help you avoid major sump pump repairs, but it’s always best to hire a pro when necessary. Just be sure to follow all safety protocols when working on a sump pump, including disconnecting the power, using proper tools and protective gear, and never touching moving parts. It’s also a good idea to consult the manufacturer’s manual for instructions on how to properly clean and maintain your specific model.


The impeller of a sump pump looks like a propeller and is attached to the motor shaft. It’s responsible for creating the suction that moves the water. It is also what makes the pump run, so it is important to keep it clear of debris. The pump may start to fail if it gets blocked by objects that get lodged inside the pump, which can range from small twigs to tree roots.

The best way to prevent this from happening is by having your sump pump cleaned on a regular basis. This includes cleaning out the sump pit, and checking for clogs in the discharge line. This will help to keep your basement from flooding during heavy storms, which can lead to major water damage in your home.

Sump pump maintenance should be done at least once a year, especially during the fall or spring when your sump pump is working hardest. A professional waterproofing company can clean your sump pump, inspect it for problems and make any repairs needed.

If your sump pump is running more often than usual, this can be a sign that the unit needs to be replaced. It could be that the pump is too small to handle the amount of water being pumped out, or that it is old and worn out.

Another sign that the pump isn’t performing properly is if it turns on and off frequently. This can be a sign of a malfunctioning float switch or a clogged discharge line. It can also mean that the pump isn’t large enough to catch and remove the amount of water being pumped out, which can lead to a flood in your home.

To test the float switch, open the basin and try moving it up and down to see if you can activate the pump. If you can’t, then you should clean the sensor out with a damp towel and fill the basin up to see if it will activate. If it still doesn’t work, then you may need to have the float switch replaced.

Drain Pipe

Many homeowners rely on sump pumps to prevent wet basements, which can lead to mold and damp conditions that affect health. Sump pumps also help move water outside where it can’t cause damage to homes or basement foundations.

If you notice your sump pump is running continuously, it may be at the end of its lifespan or rapidly approaching that point. It could also be that it’s too small for the volume of water it’s tasked with discharging. When this occurs, the motor must constantly struggle to keep up and will eventually burn out.

Loud noises from the pit are another indication that your sump pump isn’t working properly. Rattling, screech, and rattling noises all indicate that the pump impeller is choked with debris, preventing it from properly sucking water out of the basin. You’ll need to remove the pump, inspect and clean the weep hole on the pump, and carefully clear out the sump pump basin. Inspect the check valve and discharge pipe for clogs as well.

Sump pumps use a discharge pipe to carry the pumped water away from your home. Building codes usually dictate that the discharge line must be at least 10 to 20 feet away from the foundation of your home.

The opening of the discharge line can become clogged with dirt, leaves, and debris that is carried in by animals and other small creatures. Look for a spot where the discharge pipe can easily be removed and cleaned to avoid clogging.

Your sump pump’s air gap is a vital component of the system. It’s designed to prevent backflow into the pump from sewer gas or other contaminants. If the air gap is clogged with debris, your sump pump won’t be able to stop flooding or backing up into your home. The air gap can be in a variety of forms including a slotted pipe, vented cover, candy cane shape, or a pipe-in-pipe arrangement.

Regular sump pump maintenance will improve its performance and extend its life. It’s important to test the backup power and alarm regularly and to replace batteries when necessary. If you’re uncomfortable working on a sump pump, it’s best to call professional help. A plumber will ensure that the float switch and pump are functioning at full capacity and that the discharge line is free of clogs. They can also check the air gap for clogs and make any necessary repairs.